NC-681
5.25" SBC w/ Socket 370: 566MHz
to 1.3GHz |
Click on image for a larger picture
(Image for illustration purposes only)
|
Overview:
- CPU: Socket 370 Supports Intel Tualatin, Pentium
III, Celeron & VIA C3 CPU up to 1.3GHz
- AGP-4X LCD/ LVDS/ CRT
- Optional Touch Panel Interface: Supports 4/5/8-wire
Panel
- Realtek 8139C 10/100 Ethernet
- 2 ATA100/66/33 IDE Ports
Specifications:
(Note: Specifications are subject to change at any time without notice.)
| CPU |
Supports Intel Socket 370 Tualatin, Pentium III,
Celeron & VIA C3 CPU up to 1.3GHz |
|
| Chipset |
VIA Chipset |
|
| Cache |
CPU Dependent |
|
| Front Side Bus |
Supports 133/100/66 MHz |
|
|
| Memory: |
|
|
| DRAM |
1 x 168-pin DIMM socket supports memory up to
512MB PC133/PC100 SDRAM/ VCM-SDRAM |
|
| BIOS |
Award/AMI BIOS, 256KB (Flash) EPROM |
|
| Watchdog Timer |
Programmable 0 ~ 256 sec |
|
| CMOS Backup |
Backup by Li battery |
|
|
|
| Video: |
|
|
| Chipset |
AGP-4X Savage4 3D/2D |
|
| Resolution |
LCD: 1600x1200 TFT/DSTN/LVDS (2-channel 110MHz)
CRT:1920x1440 2D/3D |
|
| DVD |
Hardware-Assisted MPEG-2 architecture for DVD
full-screen video playback |
|
| Memory |
AGP-4X LCD/ LVDS/ CRT: LVDS/TFT/DSTN LCD/CRTW/
8M~32M SMA memory (shares system memory as display memory) |
|
| TV Out |
Signal pin for optional TV-out daughter board |
|
|
| Storage |
|
|
| FDD |
FDD port x 1:Up to 2 devices - 3.5" or 5.25"
FDD or LS120 |
|
| HDD |
ATA100/66/33 IDE Port x 2: Up to 4 IDE devices
|
|
| CompactFlash
I/II |
CF-2 socket for IDE Flash Disk or IBM 1.8"
MicroDrive 340MB/1GB HDD |
|
|
| I/O: |
|
|
| Serial |
Serial Port x 2: RS-232 x 1 + RS-232/422/485
x 1 |
|
| Parallel
Port |
Bi-directional SPP/EPP/ECP port |
|
| Digital
I/O |
4-bit DI and 4-bit DO, TTL level |
|
| Mouse/Keyboard |
PS/2 Keyboard & PS/2 Mouse: 5-pin header |
|
| Bus
Type |
PC/104 socket, PCI slot x 1 (suitable Position
for riser card for low-profile application) |
|
| LAN |
Realtek 8139C 100/10M LAN x 3 |
|
| Speaker
|
Buzzer on Board |
|
| Audio |
AC97 Audio on board |
|
| USB |
4 X USB pin header on board |
|
| IrDA |
IrDA pin header on board |
|
|
| Mechanical |
|
|
| Power |
+/-5V & +/-12V through ATX power connector
|
|
| Dimensions |
203 X 146mm |
|
| Temperature
|
0°C ~ 60°C |
|
|
